Features

  • Possibility of fertigation according to online drainage analysis
  • Maximum distance from sampling point – up to 400 meters
  • Sampling is taken during and after irrigation
  • Depending on the measured values the controller will automatically perform the following actions:
  • Increasing the amount of water in the next cycle:- Reducing the dose of fertilizer/acid in the next cycle- Activating an emergency flushing circuit (without fertilizer)The basic system includes 2 sampling points and pH/EC controllerTechnical Features

    – Supplied with either 50Hz or 60Hz pump to select

  • The system includes: Pump, fertilizer meter, pH/EC controller, electric valve for each sampling channel

Features

  • Ideal for lawns, drip systems, and target and basic agriculture
  • Changing duration of irrigation in percentage
  • Suitable for a wide range of valves and solenoids
  • 24V power supply

Features

  • Ideal for target systems and dripping in home gardens, flower beds, roof gardens and flower pots
  • Changing duration of irrigation in percentage
  • Optional – irrigation per seconds (Model S)
  • Controlled-via smartphone (BT model)**
  • IP68
  • Suitable for two- or three-wire solenoids
  • Operated by 9V battery

Features

  • Possibility of fertigation according to accumulated radiation
  • Automatic opening/closing of windows in the greenhouse (according to wind direction)
  • Real-time adjustment of irrigation plans to the climate – temperature, humidity, wind
  • The basic system includes measuring wind direction and speed, radiation, rain Option to add temperature and humidity measurement

Features

  • Connected to Galileo, the unit allows:
  • Real-time response to temperature and humidity changes
  • Switching fans ON/OFF in the greenhouse according to built-in control plans
  • Opening/closing windows in a greenhouse

Features

  • Precision EC sampling and monitoring system enabling electrical conductivity control in water, thus allowing to monitor mineral solvents in water
  • Possibility of fertigation according to online pH/EC analysis
  • Sampling is taken during and after irrigation
  • Depending on the measured values, the controller will automatically perform the following actions:
  • Increasing the amount of water in the next cycle
  • Reducing the dose of fertilizer/acid in the next cycle
  • The basic system includes 2 sampling points and pH/EC controller

Features

  • The IRROMETER operates according to tensiometer principle, measuring the soil water voltage. Soil water tension is the energy (vacuum) applied to the soil by the plant as it draws water for nutrition. This force is measured in centibar (cb) or kilopascals (kPa) of a high-voltage reading, indicating the dry end of the scale, and a low reading indicating the wet end of the scale
  • The IRROMETER operates according to tensiometer principle, measuring the soil water voltage. Soil water tension is the energy (vacuum) applied to the soil by the plant as it draws water for nutrition. This force is measured in centibar (cb) or kilopascals (kPa) of a high- voltage reading, indicating the dry end of the scale, and a low reading indicating the wet end of the scale
  • Consists of an airtight, liquid-filled pipe equipped with a porous ceramic tip and a special vacuum gauge.
  • Sampling is taken during and after irrigation
  • The drier the soil, the higher the meter reading
  • Depending on the measured values, the controller will perform the operations manually or automatically

    Increasing the amount of water in the next cycle

– Increasing the amount of water in the next cycle

– Reducing or halting irrigation

  • Actually, the Irrometer indicates how hard the roots work to absorb the water

Features

Measurement options:

2000 ppm

5000 ppm

10000 ppm

Features

  • Up to 1,500 meter distance between the controller and the remote unit
  • For operating valves, pumps, fertilizers, fans, lighting and more
  • Enables analog and digital sensor data collection
  • Available in 4 or 8 activation formats, 4 analog inputs, 8 digital inputs

Features

  • Transmission range of 2 km in line of sight, 9 relays can be used for maximum range
  • For operating valves, pumps, fertilizers, fans, lighting and more
  • Enables analog and digital sensors data collection
  • Available in 4 or 8 activation formats, 3 analog inputs, 6 digital inputs
  • Option to connect to a solar kit
  • Possibility to skip frequencies when needed