Features

  • The app allows you to control up to 50 main irrigation lines, and thus create a hierarchical network
  • Gradually open/close irrigation capacity to prevent high pressure buildup
  • Limiting the flow rate to the piping in case of bottleneck. After programming the limiting flow rate, the system prevents the actual flow rate from automatically exceeding the limit
  • 200 irrigation devices that collect data related to water/time and up to 7 different fertilizers
  • 100 water meters that distribute the amount and flow rate of water measured by the water meter between the active valves. This unique capability allows the use of a single water meter for many valves, while simultaneously operating each valve individually
  • Up to 40 local fertilizer pumps use a simple action program that is part of the irrigation program
  • Up to 8 fertilizer centers allow up to 6 fertilizer pumps to be operated, with pH/EC control
  • Five pump housings thanks to a special program. This allows easy operation of a combination of up to 5 water pumps and up to a total of 20 water pumps
  • Up to 20 virtual water meters by displaying the total flow rate and accumulation of water meters. Each virtual water meter can also display the flow rate balance at a certain point, allowing the use of the element called Burst Control (Net Protection)
  • Up to 20 input conditions for starting, delaying or ending irrigation. If an element contains a condition input and/or a sensor (for example, a pressure transducer), it can suspend the hinge pipe to which it is connected
  • Up to 4 mixing nodes for controlling the mixture of the water dilution. For example, if the result of mixing drainage or salt water with fresh water complies with the required EC
  • Up to 200 irrigation programs with up to 50 valves per program

Features

  • Control of up to 24 valves + Master
  • Accurate fertilizing, proportional or quantitative with EC/pH
  • Automatic filters flushing programs
  • One way Remote Terminal Units
  • Multiple users at different permission levels
  • 8 Irrigation programs (series) with no limit to the number of starts per day
  • Compatibility with a wide range of AC or DC solenoids
  • Over The Air (OTA) Firmware updates
  • Detailed set of reports: Irrigation logs, water consumption
  • An array of real-time email alerts and / or push notifications from the app
  • Real time over/under flow alert
  • Irrigation by quantity or time
  • Weather based irrigation option
  • Units location on Google Map
  • Indoor and Outdoor installation

Features

  • Intensive irrigation with multiple cycles per day (S8000 model)
  • Seconds-based irrigation and in minute intervals (S8000 model)
  • Control for situations requiring a large number of activations per day (S8000 model)
  • Smart phone control (8000BT)*    *Coming soon
  • 24V electrically powered
  • Suitable for a broad range of valves and solenoids
  • Suitable for misting in greenhouses
  • Suitable for cooling poultry coops and cow sheds
  • Connection to a Normally Closed (NC) rain sensor

Features

  • Ideal for sprinkler and drip irrigation systems in home gardens, flowerbeds, roof gardens and flower pots
  • Suitable for time-based irrigation of small farming plots in areas without electricity
  • Optional – Seconds-based irrigation and minutes-long cycles (S model)
  • Smart phone control*
  • IP 54
  • Time-based fertigation (F11 model)
  • Suitable for two-wire or three-wire solenoids
  • Powered by a 9V battery

Features

  • The system is available with 1-8 fertilizer channels, concurrent, fully synchronized operation
  • Proportional fertigation or according to the EC/pH control
  • For automatic control of the irrigation, fertigation and filter washing
  • Fertilizer flow rate selectable: 120, 350, 700, 1200 liters per hour
  • The Fertijet is mounted on an aluminum frame. It includes Venturi injectors, flow meters, booster pump, fertilizer valves, backflow preventers, pressure gauge, fertilizer meters and other accessories

Features

  • An automatic irrigation system for balconies containing all of the necessary accessories
  • Controllers can be selected – Model 9001EZ or 9001BT, which is controlled via a smart phone
  • The kit includes: piping, drippers, connectors and irrigation controller
  • Maximum flexibility in irrigating the plant

Features

  • Irrigation programs separately by series A, B, C
  • Weekly program: day-based irrigation
  • Cyclic program: irrigation frequency of once per day to once per month
  • Time-based fertigation
  • Auxiliary program for lighting or for other independent electric activation
  • Irrigation duration: from one minute to 9 hours
  • Delay function – from one day to 240 days
  • Seasonal adaptation of the irrigation duration in percentages
  • Electrically powered

Features

  • Suitable for small gardens and balconies
  • Quick, simple installation – connects to a standard garden sillcock
  • Features an internal valve and built-in filter
  • 3/4” threading
  • Operating pressure 1-7 Bar
  • Low flow rate
  • Weekly irrigation program

Features

  • Suitable for small gardens and balconies
  • Quick, simple installation – connects to a standard garden sillcock
  • Features an internal valve and built-in filter
  • Threading 3/4” NH/BSP
  • Operating pressure 1-7 Bar
  • Low flow rate

Features

  • Hydraulic valve, available in diameters of ¾” to 2”
  • Suitable for line irrigation which consists of multiple sprinklers and/or a single long line of drippers
  • Battery-powered
  • Low battery alarm
  • Manual mechanical opening
  • Option for connection to rain sensor